// LCD5110_Bitmap (C)2013 Henning Karlsen
// web: http://www.henningkarlsen.com/electronics
//
// This program is a demo of how to use bitmaps.
// You can also see how to use invert().
//
// This program requires a Nokia 5110 LCD module
// and Arduino 1.5.2 (or higher).
//
// It is assumed that the LCD module is connected to
// the following pins.
//      SCK  - Pin 8
//      MOSI - Pin 9
//      DC   - Pin 10
//      RST  - Pin 11
//      CS   - Pin 12
//
#include <LCD5110_Basic.h>

LCD5110 myGLCD(8,9,10,11,12);

extern uint8_t arduino_logo[];
extern uint8_t oshw_logo[];

void setup()
{
  myGLCD.InitLCD();
}

void loop()
{
  myGLCD.drawBitmap(0, 0, arduino_logo, 84, 48);
  delay(4000);
  for (int i=0; i<2; i++)
  {
    myGLCD.invert(true);
    delay(500);
    myGLCD.invert(false);
    delay(500);
  }
  delay(4000);

  myGLCD.clrScr();
  myGLCD.drawBitmap(14, 0, oshw_logo, 56, 48);
  delay(4000);
  for (int i=0; i<2; i++)
  {
    myGLCD.invert(true);
    delay(500);
    myGLCD.invert(false);
    delay(500);
  }
  delay(4000);
}